Cats heart - DTF print sheet

DTF prints are suitable for sweaters, shirts and other textile surfaces. Suitable as iron-on stickers.

Instructions for using DTF transfers (with iron):

1. Preparation:
   
   *Choose a suitable textile (cotton or cotton blend recommended).
   *Make sure the textile is clean and ironed.
   *Place on an heat-resistant surface.

2. Positioning:
   
   *Place the DTF transfer face down on the textile where you want to iron it.
   *Make sure the transfer is positioned correctly and is not wrinkled.

3. Ironing:
   
   *Heat your iron to maximum heat (no steam!). If your iron has a fabric setting, select the cotton/linen setting.
   *Place baking paper over the DTF transfer.
   *Press the iron firmly against the transfer, ironing evenly over the entire surface for about 15-20 seconds. Make sure to iron all corners and edges.
   *Wait for the transfer to cool (about 1-2 minutes).

4. Removal:
   
   *Once the transfer has cooled, carefully peel off the protective film. If any part of the image is not sticking, repeat the ironing process.

5. Post-processing (recommended):
   
   *After removing the film, place the baking paper back on and lightly iron over it again for a few seconds to ensure better adhesion and durability.

Important:

• It is recommended to wait at least 24 hours before washing for the first time.
• It is recommended to wash printed textiles by hand or in a washing machine on a gentle cycle, choosing a low temperature (up to 30°C) and turning them inside out.
• Do not iron directly over the print.

**If you wish for a different size, please message us before buying kalizains.shop@gmail.com