Cats heart - DTF print sheet

DTF prints are suitable for sweaters, shirts and other textile surfaces. Suitable as iron-on stickers.

Instructions for using DTF transfers (with iron):

Preparation:

*Choose a suitable textile (cotton or cotton blend recommended).
*Make sure the textile is clean and ironed.
*Place on an heat-resistant surface.
Positioning:

*Place the DTF transfer face down on the textile where you want to iron it.
*Make sure the transfer is positioned correctly and is not wrinkled.
Ironing:

*Heat your iron to maximum heat (no steam!). If your iron has a fabric setting, select the cotton/linen setting.
*Place baking paper over the DTF transfer.
*Press the iron firmly against the transfer, ironing evenly over the entire surface for about 15-20 seconds. Make sure to iron all corners and edges.
*Wait for the transfer to cool (about 1-2 minutes).
Removal:

*Once the transfer has cooled, carefully peel off the protective film. If any part of the image is not sticking, repeat the ironing process.
Post-processing (recommended):

*After removing the film, place the baking paper back on and lightly iron over it again for a few seconds to ensure better adhesion and durability.

Important:

It is recommended to wait at least 24 hours before washing for the first time.
It is recommended to wash printed textiles by hand or in a washing machine on a gentle cycle, choosing a low temperature (up to 30°C) and turning them inside out.
Do not iron directly over the print.

**If you wish for a different size, please message us before buying kalizains.shop@gmail.com